Enclosure Preparation - AGA marvel AELTTDW Instructions D'installation

Electrical Preparation
The dishwasher is designed for an electrical supply of 120V, 60Hz, AC, connected to a dishwasher-
dedicated, properly grounded electrical circuit with a fuse or breaker rated for 15 amperes.
Preparation for Installing Mounting Brackets
• Place the two mounting brackets into the top
corners of the dishwasher.
• Fix the mounting brackets (A) to the top
corners of the dishwasher, with the screws
supplied.
• Bend sides of mounting brackets (B) in order
to fix from sides (if necessary).

ENCLOSURE PREPARATION

WARNING
DANGER
CAUTION
NOTICE
FOR YOUR SAFETY
WARNING
Dishwasher must be secured to adjacent cabinetry
using the mounting brackets provided. Failure to do
this may cause damage to property or bodily injury.
DANGER
CAUTION
Adjusting Height
If the height of the enclosure is 33-7/8" to 35-7/8"
NOTICE
(86.1cm - 91.1cm), adjust supports as shown in the
figure.
FOR YOUR SAFETY
8