Steam Protection Foil - AGA marvel AELTTDW Instructions D'installation

Steam Protection Foil

Steam will form inside the dishwasher during operation.
At the end of the cycle, when the dishwasher door is
opened, it is required to use a steam protection foil to
prevent any steam from collecting on the underside of the
counter top.
Fitting the Protection Foil
• Before applying the steam protection foil to the underside of the countertop, clean the area with a damp
cloth (as shown in Figure A). Once the area dries, apply the steam protection foil.
• The steam protection foil will be applied at the location where the hot steam escapes when you first open
the door (as shown in Figure B).
Placement of Dishwasher into the Opening
Now place the dishwasher into the opening and get ready to connect all hoses and electrical connections.
INSTALLATION PREPARATION
A
Steam protection foil must be applied where
the steam escapes when door is first opened.
Failure to install the steam protection foil
during installation can lead to damage to to
the cabinets and countertop.
FOR YOUR SAFETY
Make sure all hoses are pulled through the
side opening of the cabinet, no hoses are
kinked, and all slack is taken out as shown
in the figure to the left.
FOR YOUR SAFETY
11
NOTICE
B
WARNING
DANGER
CAUTION
NOTICE