Tools Which May Be Needed - AGA marvel AELTTDW Instructions D'installation

IMPORTANT - PLEASE READ AND FOLLOW
• DO NOT operate the appliance if damaged, malfunctioning, partially disassembled, or if it has missing or
broken parts.
• Also follow the safety instructions of the use and care guide.
• To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the dishwasher
is completely enclosed at the time of installation.
• Only connect the dishwasher to the power supply when all installation and plumbing work is complete.
• If the dishwasher is installed in a location that experiences freezing temperatures (e.g. in a vacation home,
cabin, etc.), you must drain all the water from the dishwasher's interior. Water system ruptures that occur
as a result of freezing are not covered by warranty.
• Dishwasher must be secured to adjacent cabinetry using the brackets provided. Failure to do this may
cause damage to property or bodily injury.
• Connect to a properly rated, protected, and sized power supply circuit to avoid electrical overload.
The dishwasher is designed for an electrical supply of 120V (volts), 60Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded electrical circuit with a fuse or breakers rated for 15 amperes.
Electrical supply conductors shall be a minimum of #16 AWG copper wire rated at 167°F (75°C) or higher.
These requirements must be met to prevent injury and machine damage. Consult a qualified electrician if
in doubt.
• DO NOT use any extension cord or portable outlet device to connect the dishwasher to a power supply.
• Ensure that any plastic wrappings, bags, small pieces, etc., are disposed of safely and kept out of the
reach of children. Danger of suffocation!
• Remove the dishwasher door when removing an old dishwasher from service or discarding it. Ensure that
the appliance presents no danger to children while being stored for disposal.
• Old appliances may contain materials that can be recycled. Please contact your local recycling authority
about the possibility of recycling these materials.
General Information
Pipe Wrench
Hole Saw
Tape Measure
Adjustable Wrench
Level

Tools Which May be Needed

Wire Cutter
Hammer
Torx Screwdriver (T20)
Slot Screwdriver
Brush
4
Drill
Wire Stripper
Phillips Screwdriver
Scissors
Pencil