Ariston Eco Manuel page 29

SILENCE/ECO function
Press and hold for under 2 seconds to enable the silence function.
If it is pressed for longer than 2 seconds, the ECO function will be enabled.
• Press this button to enable/disable the Silence function, which allows the air condi-
tioning unit to set an ultra-low fan speed for the internal unit, thus keeping the room
extremely silent.
• Press and hold this button for longer than 2 seconds to enable/disable the ECO fun-
ction. When the unit is in cooling mode, this function helps to minimise electricity
consumption by optimising the operating parameters of the compressor and the fan
in the internal unit.
MEMORY function
It is used to save the current settings or restore the previous settings.
• The fi rst time the unit is connected to the power supply, the AUTO 24°C operating
mode is activated by pressing the MEMORY button, with the Auto fan speed.
• If you press this button when the remote control system is on, the system auto-
matically restores the previous settings, i.e. the operating mode, the temperature
setting, the fan speed and the sleep function (if activated) and transmits the sig-
nals to the unit.
• Whereas if you press this button when the remote control system is off , the sys-
tem restores the previous settings, but does not transmit the signals to the unit.
Furthermore, the sleep function is deactivated.
• By keeping the button pressed for more than 2 seconds, the system automatically
saves the current operating settings, i.e. the operating mode, the temperature set-
ting, the fan speed and the sleep function (if activated).
GB
\ 29