Breguet 5247 Mode D'emploi page 7

5247
"C "
LASSIQUE CHRONOGRAPH
-
WATER RESISTANT TO
The crown has two positions:
1. Neutral position
(manual winding)
2. Time-setting position
,
TACHYMETRIC SCALE
3 (30 )
BAR M
Starting the watch
Crown in position 1. This position
allows you to wind the movement. To
start the watch, wind it fully by turn-
ing the crown upwards (
resistance is felt. ON NO ACCOUNT
FORCE THE CROWN. When the resis-
tance is felt at the end of winding, it is
important to turn the crown down-
wards ( ) (at least
M M
to release the crown wheel. Thereafter,
wind the watch daily, preferably at a
regular time.
,
MANUALLY WOUND
Setting the time
Pull the crown out to position 2. Turn
the crown upwards (
hands forwards to the desired time.
) until For accurate time-setting, ensure that
L L
the last operation was done in a clock-
wise direction. Then push the crown
back to position 1. After this opera-
tion, rotate the crown downwards (
1 / turn) in order to make sure it turns freely.
4
,
) to move the
L L
)
M M