Pump Performance; Maintenance - Pond Boss 52734 Manuel D'utilisation

Step 13. Place the assembled
filter kit in water.
Step 14. Utilize the pivoting base
to achieve a more vertical fountain
display if needed.
Step 15. Connect the pump into
a properly grounded electrical
outlet.
NOTE: If the diverter valve was
used, you can adjust the flow
control as needed.

PUMP PERFORMANCE

MAINTENANCE

• Occasional cleaning of the filter pads will be necessary to ensure the proper
functioning of the filter. The coarse filter pad is a designed to trap large debris. The
fine filter pad catches smaller particles. All pads should be removed and washed with
clean water when they are visibly soiled - for best results, clean the filter pads weekly.
• Before cleaning, always disconnect the pump from the power source.
• Filter pads should be replaced annually. Use pond boss
(Item # 52367, 52773)
• The exterior surface of the filter box may also need occasional cleaning. Particularly
if the openings in the top of the filter box are obstructed. When cleaning the filter
box use warm water only. Do not use any chemicals that may destroy the beneficial
bacteria.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750
13
15
Pump Specifications
Max Flow Rate
320 GPH at 0 ft. height
Power Consumption
23 watts / 0.4 amps
14
Replacement Filter Pads
®
7