Preparation; Operation Instructions - Pond Boss 52734 Manuel D'utilisation

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present.
Compare parts with package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated assembly time: 15 minutes
• No tools required for assembly.

OPERATION INSTRUCTIONS

Step 1. Place your pump
inside the filter box close to
the center with the pump
outlet facing up. Route the
pump power cord through the
grove on the back corner of
the filter box.
Step 2. Place bioballs around
the pump.
Step 3. Connect the extension
tube to the outlet of the pump
using the supplied adapters.
Step 4. Tighten the locking
nut for a secure fit.
Step 5. Place the fine filter
pad (blue) over the bioballs
and pump and add the course
filter pad (black) on top.
Step 6. Place the lid over the
box. It should snap closed.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750
1
3
5
2
4
6
5