Pond Boss 52734 Manuel D'utilisation page 6

This kit includes a coupler and a diverter valve. To flow water to the fountain nozzle
only, proceed to step 7. To flow water to the fountain nozzle and a spitter, skip to step
10
7 8
Step 7. Connect the two
extension tubes with the
coupler.
Step 8. Connect the fountain
nozzle to the top of the
extension tube.
10
9
Step 9. Place the assembled
filter kit in water, and skip to
step 14.
Step 10. Connect the
extension tubes to the
diverter valve. Make sure the
arrow is pointing up and the
diverter valve is connected
as shown.
11
Step 11. For the use of the
diverter valve, connect 1/2
in. ID tubing onto the second
output of the diverter valve.
Connect the other end of
tubing to a spitter or other
water feature.
12
NOTE: Tubing and spitter are
not included.
Step 12. Connect the
fountain nozzle to the top of
the extension tube.
VISIT WWW.THEPONDBOSS.NET FOR PRODUCT INFORMATION AND TIPS.
6