Bosch MRC23EVS Consignes De Fonctionnement/Sécurité page 12

BM 2610004573 03-12_BM 2610004573 03-12 6/26/12 7:16 AM Page 12
3. FINE DEPTH ADJUSTMENT:
To use the fine adjustment feature, turn the
fine adjustment knob clockwise to lower the
router bit or counter-clockwise to raise it.
4. After making depth adjustments, re-clamp
the motor.
NOTES:
• Be sure macro adjustment lever is engaged
in one of the macro adjustment notches
before making a fine adjustment.
• To prevent damage to tool, avoid wedging
the macro adjustment lever against the
upper A or lower B portion of the housing as
shown in figure 6.
• If the macro adjustment lever is engaged in
the notch closest to the collet, the entire
depth range can be accessed using fine
depth adjustment alone. This makes it
unnecessary
adjustment, which is particularly helpful
when using the router in a router table.
• When the router is installed in a router table,
it can be adjusted with a 1/8" hex wrench,
not included with all models. (See page 22).
• The RA1002 Fine Adjustment Control
Extension, an optional attachment, allows
fine adjustment from beyond the top of the
motor housing. To install, simply press the
RA1002 into the end of the base's own fine
adjustment knob. (Fig. 7)
• To allow precise settings, the indicator ring
is graduated in English and Metric
increments, and each line is equal to .004"
or 1/10 mm.
to use macro depth
FIG. 7
• One full turn of fine adjustment knob = 1/16"
or approximately 1.5 mm. The fine
adjustment mechanism has a total
adjustment range of 1-9/16" (40 mm).
• The indicator ring may be reset to zero
without moving the fine adjustment knob,
to allow the user to begin the adjustment
from any reference point desired.
-12-
Fine Adjustment
Control Extension
Fine Adjustment
Knob