Danby Designer DCRM31WDD Guide D'utilisation page 9

Occasionally, a problem is minor and a service call may not be necessary- use this troubleshooting guide for a possible
solution. If the unit continues to operate improperly, call an authorized service depot or Danby's Toll Free Number
1-800-263-2629 for assistance.
PROBLEM
1) Does not work.
2) Refrigerator runs
continuously.
3)1nternal temperature not
cold enough.
POSSIBLE CAUSE
• No power to unit
• Power cord is unplugged.
• Wrong voltage is bemg used.
• Temperature set too low.
• Door is not closed.
• Hot food inserted.
• Door opened too long or too
often.
• Close proximity to heat
source or direct sunlight.
• No power to unit.
• Power cord is unglu ed.
• Temperature set oo igh.
• Door is not closed.
• Hot food inserted.
• Door opened too long or too
often.
• Air flow obstruction.
• Wrong voltage is beina used.
• Close proximity to hea
source or direct sunlight.
7
POSSIBLE SOLU'TION
• Check connection of power
cord to power source.
• Plug in unit.
• Use proper voltage.
• Set temperature control to
warmer setting
• Close door securely.
• Be sure food is at room
temperature before inserting.
• Minimize door openings/
duration.
• Do not place unit close to
heat sources or direct
sunlight.
• Check connection of power
cord to power source.
• Plug in unit.
• Check setting and increase
as needed.
• Close door securely.
• Be sure that food is at room
temperature.
• Mimmize door openings/
duration.
• Allow room for air to
circulate around unit.
• Use pro Jer voltape.
• Do not place uni close to
heat sources or direct
sunlight.