Installing The Memory Card - Mio Work Z100 Série Guide De Mise En Route

en

Installing the memory card

1. Open the cover on the left side of the device to locate the memory card
slot.
2. Hold the microSD card by the edges and gently insert it into the slot with
the label facing the front of your device.
CAUTION! Do not apply pressure to the centre of the memory card.
3. To remove a card, gently push the top edge of the card inwards to release
it, and then pull it out of the slot.
IMPORTANT! Before removing the memory card, you are recommended to
unmount it from the system. To unmount the memory card, tap Storage >
Unmount memory card from the Settings menu.
Connecting your device to a computer
Connect the mini-USB end of the USB cable to your device and the other end to a USB port in your
computer.
Tip: If this is the first time you connect the device to your computer, you need to install the USB
driver on your computer when prompted. The device's USB driver is available from Mio's website:
http://miowork.mio.com/
4