Cleaning And Maintenance - HAEGER Perfect Drip Mode D'emploi

English
3. Then press "Prog" button one time, the LCD displays "CLOCK" at the top
right corner, that shows the current time. You can adjust the current by
pressing the "HR" and 'MIN" button.
4. After setting current time, press the "Prog" button one time, the LCD
displays "TIMER" at the top left corner, then press "HR" and "MIN" button to
set the appointment time.
5. After finishing setting the time, press "Prog" button for one time. The
grinding button indicator will keep flashing.
6. When the time matches the programmed time, the coffee maker will start
the grind and brew cycle.
With coffee powder
1. Performs steps 1-2 from the above point A.
2. Press the coffee button
indicator light will start flashing.
3. Performs the steps 3-5 described above to set the stating time.
4. The coffee button indicator will keep flashing.
5. When the time matches the programmed time, the coffee maker will start
the brew cycle.
WARNING:
– Do not open the top cover when the coffee machine is under
running status. If you open the top cover during working process, the
machine will automatically stop working. If you want to continue to
use, please operate according to the corresponding instructions.
– Do not touch the hotplate while the coffee maker is in operation. The
hotplate is very hot and presents a risk of burns.

Cleaning and maintenance

Clean the appliance before the first use, immediately after each use and after
a prolonged period of disuse.
• Do not forget to remove the plug from the socket before cleaning the
appliance.
• Wipe outside with soft dry cloth when coffee machine is wet, never use
metal polish.
• The removable items should be washed in hot soapy water. Rinse them
6
continuously for two times, the button
Instructions for use