Operating Instructions; Description Of The Controls And Elements - Promax MD-200 Manuel

USER'S MANUAL. MD-200

3 OPERATING INSTRUCTIONS

3.1

Description of the Controls and Elements

Front panel
[1]
Digital Display
The digital display has a 3
polarity, decimal point, "
annunciators.
[2] Rotary Switch
Select the Function and Range desired.
[3]
COM Input Terminal
Ground input connector.
[4] VΩ Input Terminal
Positive input connector for Volts, Ohms and Diode.
[5] µA/mA Input Terminal
Positive input connector for Amp measurements (up to 200 mA).
[6] A Input Terminal
Positive input connector for Amp measurements (up to 10 mA).
[7] RANGE Switch (Manual Range)
"Range" switch is pushed to select manual ranging and to change ranges. When
"Range" switch is pushed once, "AUTO" annunciator on the LCD is disappeared.
Push "Range" switch to select appropriate range to be used. Push "Range" switch
and hold 2 seconds to return to Autoranging.
September 2002
Figure 1.- Front panel
1/2
digits LCD readout (maximum reading 1999), auto
AC
", -MEM, , LOΩ, Auto, Hold and Unit
Page 9