Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
No Hands Symbol
Wet Conditions Alert
Extremely Bright Light
V
Volts
A
Amperes
Hz
Hertz
min
Minutes
Alternating Current
n o
No Load Speed
Class II Construction
.../min
Per Minute
MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand opera-
tor's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Failure to keep your hands away from the blade will result in
serious personal injury.
Do not expose to rain or use in damp locations.
This product uses extremely bright LEDs. To avoid serious eye
injury, do not stare into the light (not even from a distance).
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits, etc., per minute
6 - English
DESIGNATION/EXPLANATION
Publicité
Table des Matières
