Hotel Menu - CYBEX CP-21072 Manuel D'instructions

Hotel Menu

In the Hotel Menu set the default channel settings to be used at power up. Settings include Password, Source Set,
Channel Set, Input and Output. NOTE: The Hotel Menu can only be accessed by entering the password.
Password Set Set or reset the password used to access the Hotel Menu. Default password is 0 0 0 0.
Boot Set Set the Auto Settings for volume and picture mode when the monitor turns on. Choices for
Volume are: Off or 0 – 100. Choices for Picture Mode are: Off, Standard, Vivid, Bright or User.
Tuner Lock Set the Tuner lock to On or Off. If "ON" is selected, it will disable the monitor search function
and change the channel name function menus.
Boot Source Sets the default Video Source when the monitor turns on. Choices are: TV or iPod.
Boot CH Sets the Boot Channel to appear when the monitor comes out of standby mode.
To be used with Boot Source and Boot CH Minor.
Boot CH Minor Sets default TV sub channel to appear when the monitor comes out of standby mode.
(Boot CH Minor required for ATSC) To be used with Boot CH.
Volume Limit Set the maximum volume level available to the user. Range is 0 to 100 in increments of 1.
Power Save Set time for auto power off. Choices are:
Off, 1hr, 2hr, 3hr or 4hr.
Source Status Select to unlock (Open) or lock (Close) the
source inputs. Sources available are: TV,
iPOD/AV, YPbPr or HDMI. See Figure 1.
Clear Settings Select to clear all current Hotel Menu settings.
Import Settings Select this to read the monitor settings from an
external EEPROM.
Export Settings Select this to write the monitor settings to an
external EEPROM.
Figure 1
5-9