Dimmer Control - Denver CRP-515 Mode D'emploi

timer from 90 minutes to 15 minutes by pressing repeatedly the
SNOOZE/SLEEP/DIMMER button (4). When sleep timer is selected,
the unit will automatically turn off once time is up.
NAP FUNCTION (count down timer)
In radio off mode, press MEM.SET/M+/NAP (6) button to enter into
the NAP mode, the NAP time 90 will be displayed during 5 seconds.
In the meantime, press repeatedly MEM.SET/M+/NAP (6) button to
set the duration time from 90 min to 10 min.
Once time is up, the alarm buzzer will sound for 30 min and then
shut off automatically. To stop the alarm buzzer, press the Radio
ON/OFF button (7).
Press the MEM.SET/M+/NAP (6) button has no effect during alarm
operation.
Press Radio ON/OFF button (7) to cancel the NAP function.

DIMMER CONTROL

The dimmer switch (4) allows you to set the brightness of the LED
display to high, medium and low 3 levels.
DAYLIGHT SAVING TIME (DST) MODE
For countries with daylight saving time (DST) (one hour of difference
between summer time and winter time), this clock radio offers you
DST option to adjust summer time.
In standby mode press and hold for 2 seconds the >>/TUNE+/DST
button (5).
The clock advances by one hour. To exit DST mode, repeat the
above operation.
RESETTING
If the system does not respond or exhibits erratic or intermittent
operation, you may have experienced an electrostatic discharge
(ESD) or a power surge that triggered the internal microcontroller
to shut down automatically. If this occurs, simply disconnect the ac
power cord and remove the system backup battery, wait for at least
3 minutes and then setup the unit again as if it is a brand new unit.
ENG-5
DENVER CRP-515.indd 6 15 12 3 2:59