Alarm Setting - Denver CRP-515 Mode D'emploi

TIME AND CALENDAR MANUAL SETTING
Setting Time and Calendar
Press Clock ADJ. (15) button in standby mode and keep depress
over 2 seconds to enter time set mode, after enter the setting mode,
press Clock ADJ. button (15) to change the mode cycle as follows:
Normal → Year → Month → Day → 12/24 H format → Real time
Hour → Real time Min → Normal
Action (during data adjustment):
- Press <</Tune - button (3) to adjust data backward.
- Press >>/Tune + button (5) to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto
forward.
- Use Clock ADJ. (15) button to confirm each setting.

ALARM SETTING

Setting Alarm 1 and Alarm 2
In standby mode, press the AL1 (17) or AL 2 (16) button once to
preview the alarm time. The alarm time is displayed, press & hold
the AL1/AL2 buttons for 3 seconds and the hours will blink. Press
AL1/AL2 button (17/16) and keep depress over 2 seconds to enter
alarm set mode. Once in the setting mode, press alarm set button
(17/16) to change the mode cycle as follows:
Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm →
AL 1 wake beep → AL 1 wake radio → AL 1 wake radio volume
→Normal.
Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm →
AL 2 wake beep → AL 2 wake radio → AL 2 wake radio volume
→Normal.
Select alarm weekday mode as follows:
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week
DENVER CRP-515.indd 3
ENG-2
15 12 3 2:59