Storage; Menu Mode; Menu Button; Error Codes - Keurig B3000 Mode D'emploi

Storage

Drain both the Hot Water and Cold Water tanks
before storing and take care to ensure that you
store your Brewer in a safe and frost free envi-
ronment. It is suggested to store your brewer
in the upright position. If you store the Brewer
in a cold environment, you run the risk of
water freezing inside the Brewer and causing
damage. When you prepare to use it after stor-
age, we recommend rinsing the Water
Reservoir with fresh water and running three
cleansing brews without a K-Cup
If you plan to move your Brewer to a different
location, turn the Brewer off, unplug it and
empty both the Hot Water and Cold Water
tanks. If your Brewer has been in an environ-
ment below freezing, please be sure to let it
warm to room temperature for 2 hours before
using.

MENU MODE

To enter MENU MODE proceed as follows:
1. Power off the brewer.
2. Open the door by grasping the Door Handle
and pulling.
3. There is a MENU button located on the
underside of the top of the K-Cup bin stor-
age area at the left side of the brewer.
4. Power ON the brewer and press the MENU
Button four times within 5 seconds.
5. Go through the menu choices by pressing
NEXT until you get to the item you want to
change and follow the on screen
instructions.
6. The MENU lists the following items.
® .

MENU BUTTON

SET LANGUAGE, the default is English,
French or Spanish can be made the default
NUMBER OF BREWS 000000, this can not
be reset
SET VEND PRICE
SET VEND/NO VEND
ADJUST BREW TEMP (187-192°F)
INVERT DISPLAY
SET SERVICE PHONE # 000-000-0000
SET MUG LIGHT OPTION
HOT WATER DISPENSE
SELECT BREW SIZE
ERROR CODE
WAS THE BREWER DRAINED? YES NO
15