LaserLiner ThermoSpot Lase Mode D'emploi page 7

Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or
be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high
voltages or high electromagnetic alternating fields.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure
it produces accurate measurement results. We recommend carrying out
calibration once a year.
1
1.
a
b
c
d
e
2
2.
Be sure to pay
attention to polarity.
f
a Laser beam switched on
g b Battery charge
c Hold function
d Measured value display
e Max. value during the measurement
f Display lighting
g Unit of measurement °C / °F
ThermoSpot Laser
3
1.
2.
07
EN