Personalisation; Setting The Temperature; Functions - Indesit IWB 61451 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Personalisation

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash
The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value
set for each wash cycle.
!
Exception: if the 2 programme is selected, the temperature can be increased up to a value of 90°C.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled
cotton and synthetic fabrics (refer to the "Table of wash cycles"). "
water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.
!
This function may not be used in conjunction with wash cycles 1, 2 (>60°), 6, 7, 8, 9, 10, 11, 12, 13, 14,
The
function saves energy by not heating the water used to wash your laundry - an advantage both to the environment
and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the same average
time of a standard cycle.
For the best washing results we recommend the usage of a liquid detergent.
!
It cannot be used with the 1, 6, 7, 8, 9, 10, 12, 13, 14,
1400-600
Press this button to reduce the spin speed.
!
This function may not be used in conjunction with cycles 9.
Delay timer
This timer delays the start time of the wash cycle by up to 12 hours.
Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the button
is pressed, the function will be disabled.
N.B. Once the START/PAUSE button has been pressed, the delay time can only be modified by decreasing it until launching
the set programme.
!
This option is enabled with all programmes.
.
" enables you to wash in less time thereby saving
,
, programmes.
GB
,
.
9

Publicité

Table des Matières
loading

Table des Matières