dirna Bergstrom bycool green line SPLIT OFF ROAD Instructions De Montage page 17

SPLIT
COMPRESSOR MOTOR
Remove the compressor motor protection
1
frame, place in the position required for
installation, mark and make boreholes and
secure with the screws supplied.
Take the 5/8 piping through to the compressor,
2
cut at the most appropriate measurement,
secure the M180 coupling and connect to the
compressor motor. (see photo point 4).
Cut the 5/8 piping and secure the load
3
connection point in the required place.
1
1
1
17
EN
®