Craftsman 580.676640 Manuel D'utilisation page 11

1. Sliding nozzle forward and back adjusts spray
pressure.
Slide nozzle backward for
high pressure mode.
2. Point nozzle toward ground, disengage safety
latch, and press trigger to test pattern.
3. Rotating nozzle adjusts spray pattern from a
narrow pattern to a fan pattern.
Twist nozzle counter-
clockwise for fan pattern.
Slide nozzle forward for low
pressure mode and
detergent application.
Twist nozzle clockwise for
narrow spray pattern.
4. For most effective cleaning, keep spray nozzle
between 8 to 24 inches away from cleaning
surface.
5. If you get spray nozzle too close, especially using
high pressure mode, you may damage the surface
being cleaned.
6. DO NOT get closer than 6 inches when cleaning
tires.
Using the Turbo Nozzle
The turbo nozzle rotates the high pressure stream in a
rapid circular pattern. The high pressure spray is most
effective when the tip of the nozzle extension is held
between 8 to 24 inches from the surface being cleaned.
The turbo nozzle produces an extremely high
pressure spray which is capable of removing paint
and cutting holes through surfaces if held too close.
• Always make sure the surface you will clean will not be
damaged by the high pressure spray by testing in a
hidden area.
To attach the turbo nozzle to the spray gun:
1. Engage safety latch to spray gun trigger.
2. Remove the nozzle extension from the spray gun,
if attached.
3. Attach the turbo nozzle extension to spray gun.
Tighten by hand.
4. Disengage safety latch to spray gun trigger.
5. Always start the turbo nozzle at a distance,
gradually getting closer to the surface until you get
the cleaning force you want.
NOTE: Detergent cannot be applied with turbo nozzle.
Applying Detergent with Adjustable Nozzle
IMPORTANT: Use chemicals designed specifically for
pressure washers. Household detergents could
damage the pump.
You must attach all hoses before you start the engine.
• Starting the engine without all the hoses connected and
without the water turned ON will damage the pump.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
11
CAUTION
CAUTION