Page 1
Item# 6698 Origami Mini Crib Assembly Instructions Mini lit de bébé Origami Manuel d’assemblage * Read all instructions before assembly and use of product. KEEP INSTRUCTIONS FOR FUTURE USE. Do not use this crib if you cannot exactly follow the instructions that come with it. * Lire toutes les instructions avant l’...
Page 2
Thank you for purchasing a Babyletto nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.babyletto.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
Page 3
PARTS • PIÈCES Not to Scale/Pas à l'échelle A-1. Back Panel B-1. Front Panel C Side panel (2) A-1. Panneau arrière B-1. Panneau avant C. Panneau latéral (2) D. Base board E. Pad D. Panneau E. Coussin de base F. Left Short base board G.
Page 4
H4. 1-1/8” Round Head Bolt with Metal Cap (2) H4. Boulon à tête ronde de H5. 0.8 x 3.5 cm Wood Dowel (8) 2,9 cm (1-1/8 po) avec calotte métallique (2) H5. 0,8 x 3,5 cm Goujons en bois (8) H7.
Page 6
* Make sure the base board (D) is installed FLAT SIDE UP. * Make sure the base board (D) is level. * S’assurer que le panneau de base (D) est bien installé LE CÔTÉ PLAT VERS LE HAUT. * S’assurer que le panneau de base (D) est de niveau.
Page 8
* Recheck all screws and bolts to be sure they are fastened securely. *Revérifier le serrage de tous les boulons et des vis. DO NOT OVERTIGHTEN. NE PAS TROP SERRER. Base board Panneau de base Ways to fold and store: Méthode de pliage et rangement : 1.
Page 9
Finish Terminé READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. LIRE TOUTES LES INSTRUCTIONS AVANT D’ASSEMBLER LE LIT. GARDER CE MANUEL EN LIEU SÛR POUR UN USAGE ULTÉRIEUR. W ARNING : INFANTS CAN SUFFOCATE In gaps between a mattress too small or too thick and product sides ●...
Page 10
CAUTION: Use ONLY mattress/pad provided by manufacturer (which must be at least 36.75 in. long by 23.25 in. wide and not more than 5 in. thick). Please refer to the label (sample below) on the inside face WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL of the headboard.
Page 11
Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and frequently during use. DO NOT use crib if any parts are missing, damaged or broken. Contact Babyletto for replacement parts and instructional literature if needed. DO NOT substitute parts.
Page 12
Ne pas utiliser le lit si des pièces sont manquantes, endommagées ou cassées. Contacter Babyletto pour le remplacement des pièces et du manuel en cas de besoin. NE PAS substituer des pièces.
ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request.
Page 14
Registering your product is even easier than before. You can register your product on our website at : www.babyletto.com/registrations IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.BABYLETTO.COM/PARTS OR YOU CAN CONTACT US BY MAIL: BABYLETTO 8700 REX RD., PICO RIVERA, CA 90660...