Reversing The Door - LG DLEX3250 Série Mode D'emploi

16
iNSTALLATiON iNSTruCTiONS

Reversing the door

WArNiNg
w
• To avoid damage to the dryer or the door, support the
door with a stool or box that fits under the door, or have
an assistant support the weight of the door.
• Always reverse the door BEFORE stacking the dryer on top
of the washer.
• Avoid dropping the door to avoid damage to the door or
the floor.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow
the instructions below can result in damage to the dryer,
property damage or injury to persons.
1. Open the dryer door.
2. You will be removing the screws shown below
(4 on left, 2 on right).
3. Remove the two decorative screws on the left using a
screwdriver.
Open Door
Decorative
Hinge
Screw
4. Remove the two latch screws and the latch.
Latch Screw
CAuTiON
w
Be sure to support the weight of the door before removing the
hinge screws.
5. Hold the hinge in place while removing the two hinge screws (to
prevent the door from dropping).
Hinge Screw
6. Remove the door from the cabinet cover.
Remove
Door