Table des Matières
Publicité
How to Use
Kako uporabite
The dust tank needs emptying when indicator light is on.
• Turn off the vacuum cleaner and unplug it.
• Grasp the handle of the tank and then press the tank separation
button.
• Pull out the dust tank.
• Empty the tank and then assemble the dust tank as below
Posodo za prah morate izprazniti, ko zasveti opozorilna luãka.
• Sesalnik izklopite in izkljuãite iz omreÏja.
• Primite za roãaj posode in pritisnite na gumb za loãitev posode.
• Izvlecite posodo za prah.
• Posodo izpraznite in jo ponovno vstavite, kot je prikazano spodaj.
Assembling dust tank
Vstavljanje posode za prah
26
Emptying dust tank
Praznjenje posode za prah
Indicator
Indikator
Dust tank cap
Pokrov posode za prah
NOTICE
• If suction power decreases after empting dust tank, clean dust tank
• Since dust tank is full, indicator continues to flash for 1 min 30 sec and
suction power will decrease for a while, then vacuum cleaner will turn itself
off.
OPOMBA
• âe po praznjenju posode za prah sesalna moã pade, posodo oãistite.
• Ko je posoda za prah polna, utripa opozorilna luãka 1 minuto in 30 sekund, moã sesanja
pa se za nekaj ãasa zmanj‰a. Potem se sesalnik samodejno izklopi.
Moving the vacuum cleaner
• Don't grasp the tank handle when you are moving the vacuum cleaner. The
Premikanje sesalnika
• Ko sesalnik premikate, ga ne vlecite za roãaj posode. âe se posoda loãi od telesa
Pull out
Izvlecite
Tank handle
Roãaj posode
vacuum cleaner's body may fall when separating tank and body. You should
grasp the carrier handle when you are moving the vacuum cleaner.
sesalnika, lahko le-ta pade na tla. Ko sesalnik premikate, ga primite za nosilni roãaj.
Tank handle
Roãaj posode
Tank separation lever
Roãica za loãevanje posode
next page
Naslednja stran
Carrier handle
Nosilni roãaj
Publicité
Table des Matières
