Initial Use; Inserting / Replacing Batteries - SilverCrest 290990 Mode D'emploi Et Consignes De Sécurité

initial use

Verify the parts listed in the scope of delivery are com-
plete.
Remove all packaging material.

inserting / replacing batteries

Slide the battery cover off the battery compartment
11
(Fig. C).
Insert the four type 1.5V AA (Alkaline Type LR6) batter-
ies (with the correct polarity) into the device (Fig. C).
Please note the marking inside the battery compartment.
Carefully close the battery cover on the battery com-
partment .
11
Do not use rechargeable batteries.
note: If the battery indicator
is displayed continu-
20
ously, measurement is not possible and you must replace
all of the batteries with new batteries. As soon as the
batteries have been removed from the device, the date
and time will be reset.
All display elements will be displayed briefly and „24h"
will flash on the display. Configure the date, time and
Bluetooth (see „Configuring date / time / Bluetooth ").
® ®
GB/IE 57