Initial Use; Inserting / Replacing Batteries - SilverCrest 297903 Mode D'emploi Et Consignes De Sécurité

In the event of a battery leak, immediately remove the
batteries from the product to prevent damage.
Only use the same type of batteries. Do not mix old
and new batteries!
Remove the batteries if the product will not be used for
an extended period.
Risk of product damage
Only use the specified battery type!
Insert the batteries according to the polarity marking
(+) and (-) on the battery and the product.
Clean the contacts on the battery and inside the battery
compartment with a dry cloth before inserting the battery!
Immediately remove drained batteries from the product.
Do not use rechargeable batteries.

Initial use

Verify the parts listed in the scope of delivery are complete.
Remove all packaging material.

Inserting / Replacing batteries

Slide the battery cover off the battery compartment
11
(Fig. C).
Insert the four type 1.5V AA (Alkaline Type LR6) batter-
ies (with the correct polarity) into the device (Fig. C).
Please note the marking inside the battery compartment.
GB/IE/NI 17