Installation Instructions - Summit FFBF192SSBI Mode D'emploi

Crisper Cover
This feature is for controlling the temperature of the crisper, and is designed to keep vegetables from
losing moisture.
Fruit and Vegetable Crisper
This compartment is suitable for storage of fruits and vegetables.
Freezer Drawer
This drawer is used to store foods, which need to be frozen, including meat, fish, or ice cream.
Integrative Ice Maker
This feature is used for making and storing ice cubes. This part is removable, and can be taken out
to save space. There is an ice maker cover to keep the ice maker clean.
To make ice:
1. Place the Integrative ice maker on a level surface, and remove the cover.
2. Pour water into the ice trays, being careful not to overfill the trays.
3. When the cubes are frozen, you can remove the ice cubes for direct use, or store them in a
freezer box for future use.
NOTE: Be sure to clean the ice maker before using it for the first time.

INSTALLATION INSTRUCTIONS

Locating your Appliance
•
Place your appliance on a level surface, sturdy enough to support its weight when it is full.
•
Keep the appliance out of direct sunlight, rain, or frost. Make the appliance is placed away from
heat sources, such as stoves, fires, or heaters. Place the appliance in a dry place to avoid
moisture.
NOTE: Before connecting the appliance to the power source, let it stand upright for four hours, to
allow the refrigerant to flow back into the compressor.
•
This appliance is intended for built-in installation, but it may also be installed as freestanding.
When installed built-in, please allow these minimum clearances to ensure the best operation and
proper ventilation:
1/4" on one side (and even more space on the hinge side to allow the doors to open wider
o
than their width to make it easier to removed shelves and storage bins)
5/8" at the rear
o
1/16" at the top
o
CAUTION: Be sure that airflow at the bottom of the appliance is not blocked.
Place the appliance in a room with an ambient temperature between 55°F and 110°F. The
refrigerator may not work properly if it is left in temperatures above or below the indicated
temperature range.
Leveling your Appliance
•
Make sure your appliance is level to ensure sufficient air circulation and performance. Adjust the
leveling feet either by hand, or by using an appropriately sized wrench.
6