Climadiff Avintage CVP 186 Notice D'utilisation page 59

Sliding wine bottle shelves
Depending on the models, the wine cellar is delivered with one or more sliding
wine bottle trays. You may purchase additional adapted wine bottle trays, as well
as sliding rails by placing an order with the after-sales service of your retailer or
via our Internet site www.climadiff.com
via www.vinokado.com
Separating shelves
Some polyvalent wine cabinets (particularly DVP305G) are equipped with 2 specific
separating shelves. For an optimum temperature distribution and separation, these 2
shelves should not be removed or repositioned.
LOADING METHOD
DETAILS ON CAPACITIES
Capacity indications assigned to the various Climadiff wine cellar models are given for guideline purposes.
They will help you make your choice according to your desires and your available space. These capacities
are defined today based on a standard bottle of the "Bordeaux 75cl tradition" type. In reality, you will
probably be collecting bottles of different shapes and sizes. For practical reasons, it is likely that you will fill
your wine cellar with a smaller number of bottles than the maximum number it can hold.
For example, if a wine cellar is loaded only with Burgundy wine bottles, there will be approximately 30%
fewer bottles than the initial quantity calculated for Bordeaux bottles.
Another important effect on loading is the number of wine bottle shelves : an additional wine bottle shelf
is equivalent to the loss of one bottle layer, and even two...
You can add more sliding shelves in your wine cellar if you want to. Just please take in consideration the
bottle quantities in that case that will be reduced.
Do not forget to take this aspect into consideration if you wish to have a more functional wine cellar and
add a large number of wine bottle shelves: you will have to decide between capacity and practicality !
LOADING
The desired temperature after the wine cellar starts running will only be reached after many hours
of operation. We recommend running your wine cellar empty for a few hours before you start
loading it.
Your wine cellar is delivered with one or more wine bottle shelves made of metal or wood according to the
models:
•
Place the supports in appropriate lateral notches inside the cabinet to fit your needs. Make sure that
the supports are inserted correctly in the notches (only a slight pressure is necessary to put the angle
iron in place and make sure that it holds properly).
under the heading "accessories", or else
.
59