Alessi SG68 Mode D'emploi page 11

For U.K. and Ireland only:
WARNING - THIS APPLIANCE
MUST BE EARTHED!
IMPORTANT
The product is fitted with a BSI
1363 plug fused at 13 A. If the
plug is unsuitable, it should be
disconnected and an appropriate
plug fitted as detailed below. If it is
necessary to replace the plug fuse,
use only fuses that are approved to
BSI 1362, rated at 13 A. If in doubt
consult a qualified electrician.
The wire in the mains lead are
coloured in accordance with the
following code:
BLUE - NEUTRAL
BROWN - LIVE
GREEN AND YELLOW - EARTH
As the colours of the wires in the
mains lead of this appliance
may not correspond with the
coloured markings identifying the
terminals in your plug, proceed as
follows;
- the wire which is coloured BLUE
must be connected to the terminal
which is marked "N" or coloured
BLACK.
- the wire which is coloured BROWN
must be connected to the terminal
which is marked "L" or coloured
RED.
- the wire which is coloured GREEN
AND YELLOW must be connected
to the terminal which is marked "E"
or by the symbol
GREEN or GREEN AND YELLOW.
SG68 W
SG68 W/CH
SG68 W/UK
Model: SG68
~50-60 Hz 1080 W
220-240 V
Ser. Nr.
GREEN AND YELLOW
TO EARTH
or coloured
Type:01