GreenWorks ELITE HT-240-T Guide D'utilisation page 11

OPERATION INSTRUCTION
STARTING AND STOPPING HEDGE TRIMMER (See Figure 3.)
1. Ensure the battery is properly installed in the hedge trimmer.
2. Slide the safety lock button into the handle and hold.
3. Squeeze the trigger. The hedge trimmer will turn ON.
4. Release the safety lock button. The hedge trimmer will stay on as long as the trigger switch
is held.
5. The hedge trimmer will stop if you release the trigger switch.
IMPORTANT: If the hedge trimmer is accidentally dropped, the hedge trimmer will turn OFF and
the blade will coast to a stop after several seconds. The hedge trimmer will then be locked OFF
again.
Safety Lock
Button
Trigger
Switch
FIG.3
11