Amibot glass Xline AGX50 Manuel D'utilisation page 22

EN
Troubleshooting
The robot does not attach
to the surface correctly
after being switched on.
Top and bottom indicator
lights flash red, the robot
emits continuous beeps.
Top and bottom indicator
lights flash red and blue.
There is a problem
with the motors or
suction ventilators.
The robot is not
connected to the
power adapter
correctly.
There is a problem on
the motherboard.
20
• Check that the
microfibre cleaning
pads are securely
attached to the
holders and they
do not restrict the
rotating disks from
moving.
• Check that the screws
on the rotating disks
are well screwed in
and not protruding.
Contact the AMIBOT
after-sales service if
the motors do not
work correctly.
• Check that the robot
is connected to the
power cable or the
extension cord.
• Check that the power
cable is not damaged.
Contact AMIBOT after-sales
department.