Amibot glass Xline AGX50 Manuel D'utilisation page 11

Operating the appliance
Installing the safety kit
Figure 1
The safety kit must be fastened to your appliance, especially if you
wish to clean an outside window or a window at a height (Figure 1).
Attach the safety tether to the robot's fastening system (Figure 2).
Then, fasten the safety tether's karabiner to a secure place to hold
the robot in case of a fall (Figure 3).
NOTES:
• The robot could fall due to a power outage of more than 30 min (AMIBOT Glass
XLine back-up battery life).
• Do not use the appliance on a frameless, excessively damp surface and do not
dampen the cleaning pads too much to prevent the robot from falling.
Figure 2
9
EN
Figure 3