Cleaning Routes - Amibot glass Xline AGX50 Manuel D'utilisation

Operating the appliance

Cleaning routes

Thanks to its powerful motors and smart scanning system, the robot
adapts its route to avoid edgeless surfaces and clean all types of
framed or frameless, flat, vertical, horizontal or sloped surfaces. The
AUTO mode can be activated via the remote control or the robot.
The other cleaning modes are activated via the remote control.
NOTE: The robot can only be used upside down on framed surfaces, using the
remote control. To do so, place the appliance on the surface you want to clean and
start the cleaning cycle.
AUTO
Figure 1
Press the Start/Pause button on the robot (Figure 1) or Start/AUTO
(Figure 2) on the remote control. The robot plans its route to cover
the entire surface.
This cleaning mode is suitable for particularly large or horizontal sur-
faces, such as a table.
Figure 2
13
EN