Functions - ClearSounds QUATTRO Manuel D'utilisation

FUNCTIONS

PAIRING TO A CELL PHONE
█
Before using your QUATTRO for the first time, you must pair it
with your Bluetooth phone. "Pairing" creates a link between
your Bluetooth equipped cell phone and the QUATTRO, and it
allows your cell phone to remember the QUATTRO's unique
ID by adding it to a list of paired devices in the phone. The
QUATTRO should be paired once with the phone before use.
Once your QUATTRO and phone are paired, your QUATTRO
automatically connects to your phone if the phone supports
that protocol. Some phones may ask if you want to manually
connect to a Bluetooth device. Check your phone's manual for
more details on how its Bluetooth functions operate.
Please Note: If the pairing information or log is deleted from
your phone, the QUATTRO unit must be paired again with the
phone prior to use.
To Pair:
1. Place the QUATTRO and phone close to each other (within
3 feet). Make sure that your phone is on.
2. With your QUATTRO off, press and hold the Multi Function
Button for approx. 6 seconds. Make sure that you continue
to hold the Multi Function Button until you see the LED
indicator flash red and blue alternately.
is now in pairing mode and will stay in pairing mode for
approx. 2 minutes.
3. Enter the Bluetooth menu on your phone and perform a
device search (for the details on device search for your
phone, refer to your owner's manual). When the scan is
complete, the phone displays the devices discovered.
4. Select Cla7 STEREO BT from the list of devices discovered
and confirm.
5. When prompted by the phone, enter the passkey as
'0000'. Your phone will confirm that pairing has occurred
and the QUATTRO will confirm it paired successfully with
10 rapid flashes.
11 – ENGLISH
The QUATTRO