operating instructions
EN
4.3
remote battery installation
!
WARNING
•
This remote control requires button batteries that are hazardous to young children.
•
WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN.
•
Swallowing may lead to serious injury or death in as little as 2 hours due to chemical
burns and potential perforation of the oesophagus.
•
If you suspect your child has swallowed or inserted a button battery, immediately
seek urgent medical assistance.
•
Examine devices and make sure the battery compartment is correctly secured (i.e.
that the screw or other mechanical fastener is tightened). Do not use if compartment is not secure.
•
Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
•
Tell others about the risks associated with button batteries and how to keep their children safe.
note:
The remote control has a removable plastic tab to prolong the battery life while shipping. Remove the tab for the
remote control to function.
1.
To replace the existing battery, remove the
battery holder.
2.
To remove the battery holder, turn remote onto
front side and press the left side lever towards
the center while pulling the battery holder out
using the slot provided.
3.
Replace existing battery, type CR 2025, with a
new battery and reinstall the battery holder into
the remote by sliding it into position, as shown.
4.
Battery cover is secure onto the remote control
when a "CLICKING" noise is heard.
note:
The remote control must remain within 5 meters (17 feet) of the appliance to be effective. This range may be
reduced when battery power is depleted. The remote control must be aimed at the center of the appliance for it
to function most effectively.
18
W415-1900 / E / 02.07.20
Battery (CR 2025)
Battery Cover
Remote
(rear side)