Cleaning And Maintenance; Cleaning; Maintenance; Malfunctions, Repairs And Warranty - IDC S1 Mode D'emploi

▷ Lock the position with the knurled screw and
then additionally tighten the Allen screw with
the Allen key.
7

Cleaning and Maintenance

7.1

Cleaning

The scanner must be cleaned regularly.
▷ Switch the scanner off.
NOTE:
Possible damage to the 3D sensor:
▷ Do notclean the optics of the 3D sensor in the
top of the scanner!
▷ Carefully vacuum out the interior of the scan-
ner.
▷ Wipe off the housing with a moist cloth. Do not
use aggressive cleaning agents.
7.2

Maintenance

Maintenance may be carried out only by trained,
specialized personnel.
C L E A N I N G A N D M A I N T E N A N C E
8 Malfunctions, Repairs and

Warranty

8.1

Malfunctions

In case of malfunctions:
▷ Restart the software.
▷ Restart the scanner.
▷ Restart the PC.
▷ Check the cable connections; disconnect and
then re-connect, as required.
8.2

Repairs

Repairs may be carried out only by trained, spe-
cialised personnel.
8.3 Warranty
The warranty complies with the statutory provi-
sions. For more information, please refer to our
General Terms of Business.
9

Environmental Protection

Packaging
In terms of packaging, the manufacturer partici-
pates in country-specific recycling systems, which
ensure optimal recycling.
All packaging materials used are environmentally-
friendly and recyclable.
Waste equipment
Waste equipment contain materials that should be
sorted for environmental-friendly recycling.
▷ After the service life has elapsed, dispose of the
scanner via the public disposal systems in an
environmentally-friendly manner.
E N
47