Step 3: Putting On The Shorts - Atlantic Therapeutics Innovo Mode D'emploi

STEP 3: PUTTING ON THE SHORTS

Follow the steps in the Quick Start Guide.
1. Unpack all contents from box. Turn the shorts inside out. Before
applying the conductive spray, we recommend that you hang the shorts
up.
2. Remove the lid from the bottle of conductive spray. Holding the bottle
approx. 15-20 cms from the shorts, spray each electrode 2 - 3 times
to ensure an even coverage. Spray each of the 8 integrated electrodes.
Turn the shorts the right way around, so that the electrodes are on the
inside, before putting them on.
Important: Put on the shorts as soon as you have sprayed the electrodes.
3. Pull on the shorts until the waistband is sitting comfortably above your
hips. The red and blue connectors should be to the front, with the wash
label to the rear, as per Fig 9.
4. Ensure the whole surface of each electrode is in full contact with your
skin.
5. 5. When the shorts are correctly positioned, the electrodes will be in
place as shown in Fig 10.
10
Fig. 7
Fig. 7
Fig. 8 Fig. 8
Fig. 9
Fig. 9
Fig. 10
Fig. 10
15-20cm