Important Safety Reminders - Hoover Xarion Greenway TXG 1210 Mode D'emploi

IMPORTANT SAfeTy ReMINdeRS

This cleaner should only be used for domestic cleaning, as described in this user guide. Please
ensure that this guide is fully understood before operating the appliance. Use only attachments
recommended or supplied by Hoover.
Warning: electricity can be extremely dangerous. This appliance is double insulated and must
not be earthed. This plug is fitted with a 13 amp fuse (UK only).
Important: The wires in the mains power lead are coloured in accordance with the following
code
Blue – Neutral Brown – Live
STATIC eLeCTRICITy: Some carpets can cause a small build up of static electricity. Any static
discharge is not hazardous to health.
AfTeR USe: Switch the cleaner off and remove the plug from the electricity supply.
Always switch off and remove the plug before cleaning the appliance or attempting any
maintenance task.
Safety with children, elderly or the infirm: do not let children play with the appliance or its
controls. Please supervise the use of the appliance by older children, the elderly or the infirm.
HOOVeR SeRVICe: To ensure the continued safe and efficient operation of this appliance we
recommend that any servicing or repairs are only carried out by an authorised Hoover service
engineer.
IT IS IMPORTANT THAT yOU dO NOT
• Position the cleaner above you when cleaning the stairs.
• Use your cleaner out of doors or on any wet surface or for wet pick up.
• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.
• Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this may
cause risk of fire / explosion.
• Run over the supply cord when using your cleaner or remove the plug by pulling on the
supply cord.
• Stand on or wrap the power cord around arms or legs when using the cleaner.
• Use the appliance to clean people or animals.
• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged stop
using the cleaner IMMedIATeLy. To avoid a safety hazard, an authorised Hoover service
engineer must replace the supply cord.
Xarion_Green__1-4_union.indd 1
geTTINg TO KNOW yOUR CLeANeR
A. Cleaner main body
B. Carry handle
C. dust Container
d. dust Container handle and latch
e. On/Off Button
f. Cord Rewind Button
g. filter door
H. filter door latch
I. Pre-Motor filter Pack
J. exhaust filter
K. Park latch
L. Navigator Handle
M. Suction Control
N. Navigator Handle Release
O. Telezoom Tube
P. Telezoom Trigger
Q. Carpet & floor Nozzle
R. Carpet & floor Nozzle Release
S. Surface Selector
T. Hose
U. 3 in 1 Accessory
V. Pet Hair Remover Mini Turbo Nozzle*
W. Allergen Remover Mini Turbo Nozzle*
X. grand Turbo Nozzle*
y. Parquet Caresse Nozzle*
(*Certain Models Only)
ASSeMBLINg yOUR CLeANeR
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release: simply press the two buttons on the hose end and pull. [2]
2. Connect the tube upper end to the navigator handle, ensure it clips and locks
store the 3in1 accessory underneath the handle.
3. Connect the tube lower end to the carpet and floor nozzle, ensure it clips and locks.
1
GB
[3], and
[4]
03/09/2009 14.22.54