Product Familiarisation; Intended Use; Installing The Batteries - Silverline 727787 Mode D'emploi

727787

Product Familiarisation

Meter:
1 Laser/Sensor
2 Laser/Sensor
3 Laser/Measurement Button
4 Area/Indirect Measurement Button
5 Measure Reference Point Button
6 ON/OFF/Clear Button
7 Backing Clip Release Button
8 Backing Clip
9 Battery Insert
LCD Screen (2) breakdown:
A
Battery Charge Level
B
Historical Memory
C
Value 1
D
Value 2 / Minimum Value
E
Value 3 / Maximum Value
F
Summary Line / Calculation Result / Latest Value
G
Measuring Mode Indicator
H
Setting
I
Continuous / Distance Measurement
J
Base Reference Point Setting
K
Top Reference Point Setting
L
Laser ON / OFF
Laser Distance Meter 40m

Intended use

Battery-powered device for measuring distance up to 40m with additional functions for calculating
surface area, volume, and Pythagoras triangle calculations.
Installing/removing the backing clip
8
8

Installing the batteries

8
1. Remove the Backing Clip (8) to reveal the Battery Insert (9)
2. Press the tab and pull the Battery Insert cover out
3. Insert the 2 x AAA 1.5V batteries, matching the '+' and '-' terminals correctly (See Fig. II)
4. Reinstall the Battery Insert cover, then the Backing Clip
Operation
WARNING: This product emits a laser beam. Do not stare into the laser beam and never point
this product at another person.
Switching ON/OFF
Note: This device will automatically switch off after 180 seconds when not in use. If this happens,
switch back on to continue usage.
Note: This device's laser will automatically switch off after 30 seconds when not in use.
silverlinetools.com
7
9
Fig. I
Fig.II
5