Hardware Maintenance; Brake; Frame, Fork, And Handlebars; Tires - URBANGLIDE 55 Manuel D'utilisation

Using as a kick scooter
Using your other foot, kick yourself along by pushing your feet along the ground. To turn, rotate the handlebars
left or right to go the desired direction. To slow down, gently push down on the rear brake. To stop, push the rear
brake all the way.

BATTERY

Make sure the power switch is in the "OFF" position when the scooter is not in use. Never store the scooter in a
frigid or icy place! Low temperature may degrade or damage the battery permanently
ALWAYS CHECK:

PERSONAL PROTECTION EQUIPMENT

Always wear proper protection equipment, such as:
A safety helmet of reliable quality. (Wearing a safety helmet may be mandatory according to the local law
or regulation).
- Elbow pads and kneepads;
- Long-sleeve shirt and long pants;
- Gloves;
- Sports shoes.
Make sure that shoelaces are tied and are kept out of the way of the wheel and the driving system.

BRAKE

Check the brake for proper function.
When you apply the brake pedal, the rear wheel shall stop rotating;
When the brake is applied, the power shall be off and the motor shall stop working
Make sure the wheels are able to rotate freely, and do not rub against the brake pedal when not applied.
Never ride the scooter if its brake malfunctions.
THROTTLE KNOB
lf the power switch in the "ON" position, rotate the throttle knob and the motor will start to drive the scooter
forward. Make sure you are in an open and safe place before rotating the knob. Balance your body and
hold the steering handle with both hands while riding.

TIRES

Check the tires far excessive wear/aging and replace them when necessary.
FRAME, FORK, AND STEERING HANOLE
Always carefully inspect your scooter before every ride. Check far cracks, wearing, or loosening; and
make repairs or replace parts where necessary.

HARDWARE MAINTENANCE

6