Getting Started - Gear4 StreetParty 4 Mode D'emploi

StreetParty 4
Features:
■ Slim design, folds flat for storage
■ Powered by 4 AA batteries (not included)
or power supply (included)
■ Dock for iPod / iPhone
■ Charges iPod / iPhone (when powered
by mains)
■ Line-in port for use with other music players
■ On / off light indicator
■ Optimized frequency response

Getting started:

To set up the StreetParty 4, follow these steps:
■ Plug the power cable firstly into the back of
the unit and then into the main supply.
Alternatively insert 4 AA batteries into the
back of the speaker.
■ Turn the POWER switch to ON.
For use with iPod /
iPhone:
■ Carefully pull out the dock platform allowing
the StreetParty 4 to sit firmly upright.
2 GEAR4 | StreetParty 4 | User Manual
Please read before use.
■ Carefully insert your iPod / iPhone into
the dock.
N.B. Your iPod / iPhone will only charge when
the StreetParty 4 is plugged in via the power
supply.
For use with other
audio devices:
■ Plug a 3.5mm audio cable (not included)
into your MP3 or MP4 player and connect
the other end into the AUX port at the back
of the unit.
■ Select the track and press play
on your music source.
Register your StreetParty 4 to activate your
warranty and receive product updates at
www.gear4.com/register
Please ensure that your iPod / iPhone is
using the latest software version. To update
the software, connect your iPod / iPhone to
iTunes. If there is a newer software version
available you will be prompted to upgrade.
Copyright © 2011 Disruptive Limited. All
rights reserved. Reproduction in part or in