Exclusion Of Liability - Intenso POWERBANK S10000-C Mode D'emploi

 With Powerbank you can charge two devices contemporaneously, for ex.
a tablet at the USB A (OUT) entry and a smartphone by the integrated
cable with the Type-C (OUT) plug.
 Of course, you can also use your own USB charging cable to connect the
Powerbank with your device. Please note, however, that devices can be
charged only through the USB A (OUT) port of the Powerbank.
 If a device is charged with the Powerbank and the Powerbank has almost
reached its capacity limits, this is signalled by flashing of the last status
LED. Please charge the Powerbank again.
 Please note that, when charging a device with a Powerbank nearly 30% of
total capacity is consumed by the charging process alone. This is caused
for example by the loss of power from circuit heat and voltage
conversion.
 For optimal performance, the Powerbank must be used regularly. If this is
not the case, fully charge the Powerbank at least every three months.
 Make sure that the heat caused by the charge process can be discharged
from the device (ideally put Powerbank on a solid and heat-resistant
surface during the use).

Exclusion of liability

Changes to the firmware and / or hardware can be made at any time
without prior notification. For this reason it is possible that parts of the
manual, technical data and images in this documentation may deviate
slightly from the product in your hand. All products described in this manual
are only for the purpose of clarification and must not necessarily match any
certain situation. No claims can be made based on this manual.
Page 6 of 8 EN