Step 3
Fix the plastic blockades (D) at the upper end
of the four posts (C). Place the tabletop (A) on
the posts (C).
Step 4
The table is fully assembled.
To adjust the height, screw in or screw out the
threaded feet at the bottom of the posts (C).
NOTE!
After assembly remove the plastic
wrapping film.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
phone: +49 (0) 5258 971-0
fax:
+49 (0) 5258 971-120
- 9 -