Publicité
Les langues disponibles
Les langues disponibles
• Table 1 – Emulation Selection
Emulation
1-1
1-2
BXL/POS
OFF
OFF
BXL/POS-KP
ON
ON
STAR
OFF
ON
CITIZEN
ON
OFF
- BXL/POS-KP (Kitchen Printer Mode): Buzzer will sound when the automatic cutting function is
activated or paper is low.
• Table 3 – International Language Selection
Country
DSW1-5
DSW1-6
U.S.A
ON
ON
France
OFF
ON
Germany
ON
OFF
U.K
OFF
OFF
Denmark
ON
ON
Sweden
OFF
ON
Italy
ON
OFF
Windows
OFF
OFF
Code
◈ Self-Test
1. Turn the printer off and close the rear cover.
2. While holding down the FEED button, turn on the printer and continue to hold until the
paper begins to feed. The self-test begins to print the printer settings and cuts the paper and
pauses. (ERROR lamp will be on.)
3. Press the FEED button to print the rolling ASCII pattern.
4. When the rolling ASCII pattern is printed, the self-test mode automatically ends.
※ Note
The self-test lets you know if your printer is operating properly. It checks the print quality,
ROM version, and DIP switch settings.
◈ Specification
Item
Printing Method
Head Pin
Dot Pitch
Dot Pin Diameter
Printing Direction
Character per line
Printing speed *1)
Printing Width
Line Interval
Font
Printer
Character Set
SMPS Input Voltage
Frequency
SMPS Output Voltage
Temperature
Humidity
Mechanism Life *2)
Auto Cutter
Paper Type
Roll Width
Roll Diameter
Paper
Paper Thickness
Paper Weight
Paper Tube (Outer)
Standard
Color
Ribbon
Size
Cartridge
Life
※ Note
*1) Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
*2) The above values are calculated under printing level 2 with recommended paper at
normal temperature. The values may vary with environment temperature, printing level,
etc.
* The specifications of print density for the black mark.(DensiEye 700 used)
Density print of the black mark: 1.0 or more
Density of the non-black mark:
0.1 or less
◈ Serial (RS-232C) Fixed Interface Model Windows Driver
Installation: SRP-275IIA,AG,C,CG (IFA-S TYPE)
1. After running the product installation CD, run the SRP-275II > Drivers > Windows
Driver > Drivers > English > SRP-275II_WIN_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Select Port Type window, select one Serial Port and click Next.
• Table 2 – Transmission Speed (bps) Selection
Setting
Transmission
2-7
2-8
2400
ON
ON
4800
OFF
ON
9600
OFF
OFF
19200
ON
OFF
DSW1-7
Code Page
ON
Page 0 (PC437 : USA)
ON
ON
Page 2 (PC850 : Multilingual)
ON
OFF
Page 5 (PC865 : Nordic)
OFF
OFF
Page 2 (PC850 : Multilingual)
OFF
Windows Code
Details
Serial impact dot matrix
9-pin serial
0.352mm (1/72")
0.28mm (0.01")
Bi-directional (logic seeking) with friction speed
Max 42 (Characters)
5.1 lines/ sec
63.5 mm
4.233 mm (1/6")
7 × 9 / 9 × 9
Alphanumeric Character : 95
International Character : 48
Extended Graphic : 128 × 27 page
100~240 VAC
50 / 60 Hz
24VDC
Operating : 0~40℃ (32~104℉)
Storage : -20~60℃ (-4~140℉)
Operating : 10~80% RH (Non-condensing)
Storage : 10~90% RH (Non-condensing)
18,000,000 Lines
1,500,000 Cuts
Paper Roll
76±0.5 mm
Max ø83 mm (3.27")
Thickness : 1-ply 0.06~0.085 mm
2
Weight : 52.3~64g/m
(0.115~0.1411 lb)
Max ø19mm (0.75")
RRC-201BR
Black and Red
13 mm (W)
RRC-201BR : 1,500,000 characters (Black)
750,000 characters (Red)
(7×9 font continual printing, ASCII, 25℃)
(Figure 1.)
4. In the Installer window, select Yes and the computer will reboot.
Citizen Mode
5. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275II Icon
2-5
2-6
> Right-Click > Properties.
ON
ON
6. In the Properties window, select the Port tab and click on the Port Settings. Check to see
OFF
ON
that the information is identical to the self-test results after installation.
OFF
OFF
ON
OFF
7. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ Parallel (IEEE1284) Fixed Interface Model Windows Driver
Installation: SRP-275IIAP,APG,CP,CPG (IFG-P TYPE)
1. After running the product installation CD, run the SRP-275II > Drivers > Windows
Driver > Drivers > English > SRP-275II_WIN_Vx.x.x.exe_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Select Port Type window, select one Parallel Port and click Next.
(Refer to Figure 1.)
4. In the Installer window, select Yes and the computer will reboot.
5. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275II Icon
> Right-Click > Properties.
6. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ USB Fixed Interface Model Windows Driver Installation:
SRP-275IIAU,AUG,CU,CUG (IFG-U TYPE)
1. After running the product installation CD, run the SRP-275II > Drivers > Windows
Driver > Drivers > English > SRP-275II_WIN_Vx.x.x.exe_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Select Port Type window, select USB and click Next. (Refer to Figure 1.)
4-1. If using Windows 2000/VISTA/2008 Server/7:
①
After the
Information window appears, turn the printer off and back on and click Yes.
After installation is complete, reboot the computer.
②
4-2. If using Windows XP/2003 Server:
①
After the
Information window appears, turn the printer off and back on and click Yes.
After the New Hardware Detected window appears, continue to click Next to install the
②
USB drive, and then reboot the computer.
※
Note
When the digital registration message appears during installation, click on either OK or
Continue Anyway.
5. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275II Icon
> Right-Click > Properties.
6. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ Ethernet Fixed Interface Model Windows Driver Installation:
SRP-275IIAE,AEG,CE,CEG (IFA-EP TYPE)
Refer to the user manual regarding separate Ethernet interface cards.(Refer to the CD)
◈ WEEE (Waste Electrical and Electric Equipment)
This marking shown on the product or its literature, indicates that is should not be
disposed with other household wastes at the end of its working life, To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
☎ BIXOLON Co., Ltd.
● Website http://www.bixolon.com
● Korea Headquarters
(Add) 7th~8th FL, Miraeasset Venture Tower, 685, Sampyeong-dong, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400, Korea
(Tel.) +82-31-218-5500
● U.S. Office
(Add) BIXOLON America Inc., 3171 Fujita St, Torrance, CA 90505
(Tel.) +1-858 764 4580
● Europe Office
(Add) BIXOLON Europe GmbH, Tiefenbroicher Weg 35 40472 Düsseldorf
(Tel.) +49 (0)211 68 78 54 0
SELF TEST
<SRP-275II VER. V01.00 STB 110608>
DIP Switch setup status
Interpreter (DIP1_1,2): BXL/POS
AutoCut
(DIP1 _ 3): Disabled
Memory S/W (DIP1 _ 5): Off
Logo Print (DIP1 _ 6): Off
Near_end
(DIP1 _ 7): Enabled
Rx ErrorPrint(DIP2 _ 1): Print ?
Black mark (DIP2 _ 2): Disable
HandShaking (DIP2 _ 3): RTS/DSR
Word Length (DIP2 _ 4): 8
Parity
(DIP2 _ 5): None
Baud Rate (DIP2_7,8): 19200
Publicité
