Weinmann WM 15805 Mode D'emploi page 8

Fitting the bracket to the standard hospital rail
2
Removing the bracket
8
1. Suspend the bracket from the standard
hospital rail using the standard rail
adapters (1).
1
Warning!
Risk of injury if bracket is loose!
An inadequately secured bracket may
fall off and injure people.
– Ensure that the latch is correctly
2. Push the locking levers (2) outwards
until the latch obviously engages.
The locking levers are now at an angle
of 90˚ to the bracket.
1. Push the locking levers (2) of the
standard rail adapters down until the
latch is released.
2. Lift the bracket off the standard
hospital rail.
2
engaged.