Linea 2000 Domo DO91130F Mode D'emploi page 40

· Unscrew the upper hinge (2).
· Lift the door (3) and place it on a padded surface to prevent it from being scratched.
· Move the screw covers and the handle (6) from one side of the door to the other.
· Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it
protrudes downwards when the hinge is turned.
· Move the cover caps from one side to the other.
· Remove the hinge pin and bottom hinge (4) by unscrewing the screws. Remove the foot (5) from the
left side.
· Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it
protrudes upwards when the hinge is turned.
· Reassemble the lower hinge (4) on the left side of the appliance by refitting the screws and reassemble
the foot on the right side.
· Put the door (3) on the lower hinge (4) and refit the upper hinge (2). Ensure the door is aligned
horizontally and vertically so that the seals are closed on all sides.
· Put the top cover (1) back and fix it in place with the screws.
USE
TEMPERATURE CONTROL
The freezer is controlled with a temperature control knob.
Adjust the control knob as desired to suit your individual preference.
Position "Normal" is the recommended position for normal use.
· Depending on the ambient temperature and the contents used, we recommend changing the setting
towards "Max" (for more cooling) or towards setting "Min" (if too cold). We recommend waiting one
day after adjusting the temperature to be able to correctly assess it.
· The running time and temperature are affected by where the freezer is located, how often the door is
opened and the temperature of the room the freezer is located in.
40
DO91130F - DO91132F
Normal
Min Max