Climadiff PACK6 Notice D'utilisation page 14

Before using the corkscrew, remove any foil from the top of the bottle using the
foil cutter provided.
1. Place the corkscrew on the top of the wine bottle. Ensure that it remains
as upright as possible at all the times. If you hold the corkscrew at an
angle to the bottle, it will not remove the cork properly
2. Hold the corkscrew firmly and depress the lower part of the switch .The
corkscrew spiral will turn in a clockwise direction and enter the cork,
then gradually remove it from the bottle. When the corkscrew
mechanism stops, the cork has been fully removed from the bottle.
3. Lift the corkscrew away from the bottle. To remove the cork from
corkscrew, hold the corkscrew firmly and depress the upper part of the
switch. The spiral will turn in an anti-clockwise direction and release the
cork.
4. Always return the corkscrew to the wine base when you have finished
with it. This will protect the mechanism while it is not in use.
Note: it has been noted the automatic corkscrew may experience problems with
a small percentage of plastic / synthetic corks and undersized corks, if in
this case the cork should be removed manually.
Recharging your corkscrew
Plug one end of the adaptor cord into the case of the recharging unit and the other end into a main socket.
Place the corkscrew into recharging unit, ensuring that it is firmly in position and is fully engaged with the
recharging connectors. We recommend that you charge your corkscrew for at least 6-8 hours. Once fully
charged, you could use your corkscrew with around 30 bottles.
14