Filling With Hand Pump; Accessories - CEMO KS-Mobil Easy 120 l Mode D'emploi

6. Remove the hose and automatic delivery nozzle
 from the integrated holder and insert the
delivery spout fully into the container / tank to
be filled.
7. Operate the automatic delivery nozzle (if neces­
sary, lock with locking device) and carry out
filling operation.
b
8. Close automatic delivery nozzle  and allow to
stop dripping.
9. Switch off pump .
10. Completely disconnect power source for the
pump, roll up cable and clamp terminal clamps
 to the tank's fixing cams.
11. Place hose and delivery nozzle into integrated
holder.
12. Close the delivery line ball valve .
13. Remove the terminal of the earth cable ,
roll up the cable and fix to the tank.
14. For the version with lid, fold down the lid and
push on the corners of the lid until the locking
bolts click into place.

5.5.3 Filling with hand pump

1. For the version with flap lid, undo the flap lid
cam by pulling apart the fastening lugs on the
locking side. Fully open the flap lid.
2. Make a conductive connection with the earth
cable  between the tank and the transport
vehicle or the ground.
3. Open the delivery line ball valve .
4. Remove the hose and delivery nozzle from the
integrated holder and insert the delivery spout
fully into the tank / container to be filled.
5. Operate or open the delivery nozzle.
6. Move the hand pump forwards and backwards
in a horizontal direction and start the filling
procedure.
Only operate the hand pump when the ball
valve and delivery nozzle are open!
a
Fig 5.5.2.2
a Trigger for opening flow
b Locking device
7. Close delivery nozzle  and allow to
stop dripping.
8. Place hose and delivery nozzle into integrated
holder.
9. Close the delivery line ball valve .
10. Remove the terminal of the earth cable ,
roll up the cable and fix to the tank.
11. For the version with lid, fold down the lid and
push on the corners of the lid until the locking
bolts click into place.

6. Accessories

The following accessories are available for
the KS­Mobil Easy 120 l / 190 l:
• Flap lid (Order code 8963) for protection
against rain and dirt
• Flap lid lock (Order code 10214)
Fig. 6.1
Filling station with flap lid
Fig. 6.2
Filling station with flap lid
and flap lid lock
GB
25