Ks-Mobil Easy With Hand Pump; Initial Setup - CEMO KS-Mobil Easy 120 l Mode D'emploi

GB

3.2 KS-Mobil Easy with hand pump

9
Fig. 3.2 KS­Mobil Easy with hand pump

Ventilation valve

Filling opening (without cap)

Delivery nozzle

Delivery line ball valve

Earthing cable 2 m

Dipstick

Hand pump

Hand pump lever

Recess for tensioning belts
22
6 2
1
4
5
3
7
8

4. Initial setup

1. Affix stickers (stickers are enclosed with the tank
documentation).
The KS­Mobil Easy 120 l must be permanently
provided with sticker UN 1203 for petrol and the
hazard label (flame on red background) on
the rear.
80 mm
UN number
The KS­Mobil Easy 190 l must be permanently
provided with sticker UN 1203 for petrol and the
hazard label (flame on red background) on
the front.
UN number
2. Fill the tank (see section 5.4).
i
Important!
Please always use an automatic delivery
nozzle to avoid overflows.
3. Perform a test filling as described in section 5.5,
but hold the delivery nozzle in the open filling
opening .
4. Close the filling opening tightly again with the cap.
The filling station is now ready for operation.
Hazard label
Hazard label